There are two steps in connecting to the iDRAC from the CMC. First you need to enable the LAN connection to the iDRAC, then you need to set the address (if you are using static IPs). Below are shown both the CLI method and the web method:


- CLI method (blade 9):
$ racadm config -g cfgServerInfo -o cfgServerNicEnable 1 -i 9
Object value modified successfully
$ racadm getconfig -g cfgServerInfo -o cfgServerNicEnable -i 9
1
$ racadm setniccfg -m server-9 -s 10.10.21.149 255.255.255.0 10.10.21.1
Static IP address modified successfully
$ racadm getniccfg -m server-9
DHCP Enabled = 0
IP Address = 10.10.21.149
Subnet Mask = 255.255.255.0
Gateway = 10.10.21.1

- Web method:
- Bring up web browser against CMC
- CMC->Chassis->Servers->Setup->Deploy Network->
- select Enable LAN; fill in IP address, subnet mask and gateway; Apply