todd_muirhead

Profile
Friends
Compliments (4)
Contributions (1,547)

Page Contributions
| Thread Contributions (143)

This report displays all thread contributions made by todd_muirhead.

1 2 3 4 5 | Next > Last

	thread	Location	Contribution Date	Replies	Last Post
	RE: MD3000 Hotspare rules	Discussion Forum	Nov 21 2008, 1:36 PM EST	2	Nov 24 2008, 12:29 AM EST by Mr_MSJ
Reply: A hotspare is required for each type - SAS and SATA. As long as the hotspare is the same size or bigger than view reply
	RE: R900 Perc 6i: Can you use both channels on the 2.5" internal backplane	Discussion Forum	Nov 20 2008, 5:39 PM EST	5	Nov 20 2008, 6:42 PM EST by w01fgang
Reply: Again, I checked with one of our PERC performance experts - The RAID adapter will see the 8 drives attached to it view reply
	RE: Help creating snapshots on MD3000i?	Discussion Forum	Nov 20 2008, 10:38 AM EST	3	Nov 20 2008, 10:38 AM EST by todd_muirhead
Reply: I'm working on a Windows Server 2003 system to getting the VSS provider installed to try out that portion with NT Backup. The view reply
	RE: Help creating snapshots on MD3000i?	Discussion Forum	Nov 19 2008, 5:40 PM EST	3	Nov 20 2008, 10:38 AM EST by todd_muirhead
Reply: I have manually created snapshots using the MDSM utility. It is also possible to use the CLI to do a snapshot. Perhaps view reply
	RE: MD3000 compatible with VMware 3.5	Discussion Forum	Nov 19 2008, 1:09 PM EST	2	Nov 19 2008, 7:38 PM EST by mar_lizardo
Reply: The MD3000 is direct attached storage that can be used with ESX, but not with the VMotion capability. The MD3000i is an iSCSI view reply
	RE: Links not available	Brocade	Nov 19 2008, 12:54 PM EST	1	Nov 19 2008, 12:54 PM EST by todd_muirhead
Reply: Links are fixed. There was a change from english only docs to multilangauge. Thanks, Todd view reply
	RE: ? Can Dell PowerEdge be told to auto power on in the BIOS	Discussion Forum	Nov 19 2008, 12:49 PM EST	6	Nov 21 2008, 3:17 PM EST by Mark2008
Reply: What specific model server are you asking about? If you are using a PowerEdge server with a Dell Remote Access Card (DRAC) then view reply
	RE: R900 Perc 6i: Can you use both channels on the 2.5" internal backplane	Discussion Forum	Nov 19 2008, 12:28 PM EST	5	Nov 20 2008, 6:42 PM EST by w01fgang
Reply: I checked with one of our PERC performance gurus and this was his answer: On the R900 with the 8 slot 2.5 bay, view reply
	RE: Xen questions...	Citrix XenServer Dell Edition	Nov 14 2008, 1:30 PM EST	1	Nov 14 2008, 1:30 PM EST by todd_muirhead
Reply: I asked one of our resident Xen experts in our Solution Engineering organization and these are the answers to your questions: 1.Xen VDI view reply
	RE: Adding disks and Lun to MD3000i issue	Discussion Forum	Nov 14 2008, 10:38 AM EST	2	Nov 14 2008, 11:21 AM EST by DaizyD
Reply: I would strongly recommend that you open a support ticket. I would think that it is possible that the data is still there, view reply
	RE: Hyper-V on a PE2950, plus access to TOE and direct-attached storage	Microsoft Hyper-V Server	Nov 12 2008, 4:00 PM EST	3	Nov 12 2008, 4:00 PM EST by todd_muirhead
Reply: I believe that TOE will work as I was able to get the iSCSI offload to work on the broadcom NICs in the R805. view reply
	RE: SAN Storage slow transfer file	Discussion Forum	Nov 6 2008, 11:45 AM EST	5	Nov 6 2008, 11:45 AM EST by todd_muirhead
Reply: First you will need to set an IP address for management of the switch. Then you will be able to use the web based view reply
	RE: M1000e with 2 x M600, MD3000i w/ clustered SQL Server 2005	Discussion Forum	Nov 5 2008, 1:03 PM EST	4	Nov 5 2008, 8:31 PM EST by mar_lizardo
Reply: The quorum is a low utilization disk, and it could share the same physical disks as your logs assuming that you have the extra view reply
	RE: SAN Storage slow transfer file	Discussion Forum	Nov 5 2008, 12:29 PM EST	5	Nov 6 2008, 11:45 AM EST by todd_muirhead
Reply: It is a best practice to use zoning at fibre channel switch level regardless of how many hosts and storage arrays your have. view reply
	RE: M1000e with 2 x M600, MD3000i w/ clustered SQL Server 2005	Discussion Forum	Nov 4 2008, 10:47 AM EST	4	Nov 5 2008, 8:31 PM EST by mar_lizardo
Reply: If you want to team two NICs for the primary data network and you also want to use two NICs for iSCSI - then view reply
	RE: SAN Storage slow transfer file	Discussion Forum	Nov 4 2008, 10:40 AM EST	5	Nov 6 2008, 11:45 AM EST by todd_muirhead
Reply: Amieer, You should Zone your fibre switch and configure the agent.config on the local navi agent. Another key thing to do is view reply
	RE: RAID	Discussion Forum	Nov 3 2008, 4:40 PM EST	2	Nov 3 2008, 6:24 PM EST by scott_hanson
Reply: There are a series of videos showing how to setup RAID on the support.dell.com site at this location. These videos show how to view reply
	RE: VMware ESX 3.5 with Thin Client	Discussion Forum	Oct 23 2008, 3:15 PM EDT	4	Oct 23 2008, 3:15 PM EDT by todd_muirhead
Reply: Dave, You are welcome to join the conversation - you are supposed to jump in when you have a question or different perspective. view reply
	RE: Flow Control on Dell R900 with BroadCom 5708 Nics	Discussion Forum	Oct 21 2008, 11:54 AM EDT	2	Oct 21 2008, 2:35 PM EDT by dave.dunn
Reply: Dave, I did a little bit of research and found that you can use the ethtool command from the service console to modify view reply
	RE: VMware ESX 3.5 with Thin Client	Discussion Forum	Oct 21 2008, 11:10 AM EDT	4	Oct 23 2008, 3:15 PM EDT by todd_muirhead
Reply: Lizardo, An R900 server should work for hosting virtual desktops for your wyse thin clients. VMware ESX Server has the capability to view reply

1 2 3 4 5 | Next > Last

4 of todd_muirhead's threads have been deleted.

JavaScript must be enabled in order for you to contribute to this site.
To start contributing, enable JavaScript by changing your browser options, then try again.

Top Contributors